forked from IQ.Lvbs/IQ.Pilot
213 lines
8.9 KiB
Python
Executable File
213 lines
8.9 KiB
Python
Executable File
#!/usr/bin/env python3
|
|
import unittest
|
|
import numpy as np
|
|
from iqdbc.car.structs import CarParams
|
|
from iqdbc.safety.tests.libsafety import libsafety_py
|
|
import iqdbc.safety.tests.common as common
|
|
from iqdbc.safety.tests.common import CANPackerSafety
|
|
from iqdbc.car.volkswagen.values import VolkswagenSafetyFlags
|
|
|
|
MAX_ACCEL = 2.0
|
|
MIN_ACCEL = -3.5
|
|
|
|
MSG_LH_EPS_03 = 0x9F # RX from EPS, for driver steering torque
|
|
MSG_ACC_01 = 0x109 # TX by OP, ACC acceleration request to the drivetrain coordinator
|
|
MSG_ESP_03 = 0x103 # RX from ABS, for wheel speeds
|
|
MSG_MOTOR_03 = 0x105 # RX from ECU, for driver throttle input and driver brake input
|
|
MSG_ESP_05 = 0x106 # RX from ABS, for brake light state
|
|
MSG_LS_01 = 0x10B # TX by OP, ACC control buttons for cancel/resume
|
|
MSG_TSK_02 = 0x10C # RX from ECU, for ACC status from drivetrain coordinator
|
|
MSG_HCA_01 = 0x126 # TX by OP, Heading Control Assist steering torque
|
|
MSG_ACC_02 = 0x30C # TX by OP, ACC HUD data to the instrument cluster
|
|
MSG_LDW_02 = 0x397 # TX by OP, Lane line recognition and text alerts
|
|
|
|
|
|
class TestVolkswagenMlbSafetyBase(common.CarSafetyTest, common.DriverTorqueSteeringSafetyTest):
|
|
RELAY_MALFUNCTION_ADDRS = {0: (MSG_HCA_01, MSG_LDW_02)}
|
|
|
|
MAX_RATE_UP = 9
|
|
MAX_RATE_DOWN = 10
|
|
MAX_TORQUE_LOOKUP = [0], [300]
|
|
MAX_RT_DELTA = 169
|
|
|
|
DRIVER_TORQUE_ALLOWANCE = 60
|
|
DRIVER_TORQUE_FACTOR = 3
|
|
|
|
# Wheel speeds _esp_03_msg
|
|
def _speed_msg(self, speed):
|
|
values = {"ESP_%s_Radgeschw" % s: speed for s in ["HL", "HR", "VL", "VR"]}
|
|
return self.packer.make_can_msg_safety("ESP_03", 0, values)
|
|
|
|
# Driver brake pressure over threshold
|
|
def _esp_05_msg(self, brake):
|
|
values = {"ESP_Fahrer_bremst": brake}
|
|
return self.packer.make_can_msg_safety("ESP_05", 0, values)
|
|
|
|
# Brake pedal switch
|
|
def _motor_03_msg(self, brake_signal=False, gas_signal=0):
|
|
values = {
|
|
"MO_Fahrer_bremst": brake_signal,
|
|
"MO_Fahrpedalrohwert_01": gas_signal,
|
|
}
|
|
return self.packer.make_can_msg_safety("Motor_03", 0, values)
|
|
|
|
def _user_brake_msg(self, brake):
|
|
return self._motor_03_msg(brake_signal=brake)
|
|
|
|
def _user_gas_msg(self, gas):
|
|
return self._motor_03_msg(gas_signal=gas)
|
|
|
|
# ACC engagement status
|
|
def _tsk_status_msg(self, enable, main_switch=True):
|
|
values = {"ACC_Status_ACC": 1 if not main_switch else 3 if enable else 2}
|
|
return self.packer.make_can_msg_safety("ACC_05", 2, values)
|
|
|
|
def _pcm_status_msg(self, enable):
|
|
return self._tsk_status_msg(enable)
|
|
|
|
# Driver steering input torque
|
|
def _torque_driver_msg(self, torque):
|
|
values = {"EPS_Lenkmoment": abs(torque), "EPS_VZ_Lenkmoment": torque < 0}
|
|
return self.packer.make_can_msg_safety("LH_EPS_03", 0, values)
|
|
|
|
# openpilot steering output torque
|
|
def _torque_cmd_msg(self, torque, steer_req=1):
|
|
values = {"HCA_01_LM_Offset": abs(torque),
|
|
"HCA_01_LM_OffSign": torque < 0,
|
|
"HCA_01_Sendestatus": steer_req,
|
|
"HCA_01_Status_HCA": 7 if steer_req else 3}
|
|
return self.packer.make_can_msg_safety("HCA_01", 0, values)
|
|
|
|
# Cruise control buttons
|
|
def _ls_01_msg(self, cancel=0, resume=0, _set=0, main_switch=1, bus=2):
|
|
values = {"LS_Abbrechen": cancel, "LS_Tip_Setzen": _set, "LS_Tip_Wiederaufnahme": resume,
|
|
"LS_Hauptschalter": main_switch}
|
|
return self.packer.make_can_msg_safety("LS_01", bus, values)
|
|
|
|
# Acceleration request to drivetrain coordinator
|
|
def _acc_01_msg(self, accel):
|
|
values = {"ACC_Sollbeschleunigung": accel}
|
|
return self.packer.make_can_msg_safety("ACC_01", 0, values)
|
|
|
|
# Verify brake_pressed is true if either the switch or pressure threshold signals are true
|
|
def test_redundant_brake_signals(self):
|
|
test_combinations = [(True, True, True), (True, True, False), (True, False, True), (False, False, False)]
|
|
for brake_pressed, motor_03_signal, esp_05_signal in test_combinations:
|
|
self._rx(self._motor_03_msg(brake_signal=False))
|
|
self._rx(self._esp_05_msg(False))
|
|
self.assertFalse(self.safety.get_brake_pressed_prev())
|
|
self._rx(self._motor_03_msg(brake_signal=motor_03_signal))
|
|
self._rx(self._esp_05_msg(esp_05_signal))
|
|
self.assertEqual(brake_pressed, self.safety.get_brake_pressed_prev(),
|
|
f"expected {brake_pressed=} with {motor_03_signal=} and {esp_05_signal=}")
|
|
|
|
def test_torque_measurements(self):
|
|
# TODO: make this test work with all cars
|
|
self._rx(self._torque_driver_msg(50))
|
|
self._rx(self._torque_driver_msg(-50))
|
|
self._rx(self._torque_driver_msg(0))
|
|
self._rx(self._torque_driver_msg(0))
|
|
self._rx(self._torque_driver_msg(0))
|
|
self._rx(self._torque_driver_msg(0))
|
|
|
|
self.assertEqual(-50, self.safety.get_torque_driver_min())
|
|
self.assertEqual(50, self.safety.get_torque_driver_max())
|
|
|
|
self._rx(self._torque_driver_msg(0))
|
|
self.assertEqual(0, self.safety.get_torque_driver_max())
|
|
self.assertEqual(-50, self.safety.get_torque_driver_min())
|
|
|
|
self._rx(self._torque_driver_msg(0))
|
|
self.assertEqual(0, self.safety.get_torque_driver_max())
|
|
self.assertEqual(0, self.safety.get_torque_driver_min())
|
|
|
|
|
|
class TestVolkswagenMlbStockSafety(TestVolkswagenMlbSafetyBase):
|
|
TX_MSGS = [[MSG_HCA_01, 0], [MSG_LDW_02, 0], [MSG_LS_01, 0], [MSG_LS_01, 2]]
|
|
FWD_BLACKLISTED_ADDRS = {2: [MSG_HCA_01, MSG_LDW_02]}
|
|
FWD_BUS_LOOKUP = {0: 2, 2: 0}
|
|
|
|
def setUp(self):
|
|
self.packer = CANPackerSafety("vw_mlb")
|
|
self.safety = libsafety_py.libsafety
|
|
self.safety.set_safety_hooks(CarParams.SafetyModel.volkswagenMlb, 0)
|
|
self.safety.init_tests()
|
|
|
|
def test_spam_cancel_safety_check(self):
|
|
self.safety.set_controls_allowed(0)
|
|
self.assertTrue(self._tx(self._ls_01_msg(cancel=1)))
|
|
self.assertFalse(self._tx(self._ls_01_msg(resume=1)))
|
|
self.assertFalse(self._tx(self._ls_01_msg(_set=1)))
|
|
# do not block resume if we are engaged already
|
|
self.safety.set_controls_allowed(1)
|
|
self.assertTrue(self._tx(self._ls_01_msg(resume=1)))
|
|
|
|
def test_cancel_button(self):
|
|
# Disable on rising edge of cancel button
|
|
self._rx(self._tsk_status_msg(False, main_switch=True))
|
|
self.safety.set_controls_allowed(1)
|
|
self._rx(self._ls_01_msg(cancel=True, bus=0))
|
|
self.assertFalse(self.safety.get_controls_allowed(), "controls allowed after cancel")
|
|
|
|
|
|
class TestVolkswagenMlbLongSafety(TestVolkswagenMlbSafetyBase):
|
|
TX_MSGS = [[MSG_HCA_01, 0], [MSG_LDW_02, 0], [MSG_ACC_01, 0], [MSG_ACC_02, 0]]
|
|
FWD_BLACKLISTED_ADDRS = {2: [MSG_HCA_01, MSG_LDW_02, MSG_ACC_01, MSG_ACC_02]}
|
|
FWD_BUS_LOOKUP = {0: 2, 2: 0}
|
|
RELAY_MALFUNCTION_ADDRS = {0: (MSG_HCA_01, MSG_LDW_02, MSG_ACC_01, MSG_ACC_02)}
|
|
INACTIVE_ACCEL = 3.01
|
|
|
|
def setUp(self):
|
|
self.packer = CANPackerSafety("vw_mlb")
|
|
self.safety = libsafety_py.libsafety
|
|
safety_param = VolkswagenSafetyFlags.LONG_CONTROL | VolkswagenSafetyFlags.ALLOW_LONG_ACCEL_WITH_GAS_PRESSED
|
|
self.safety.set_safety_hooks(CarParams.SafetyModel.volkswagenMlb, safety_param)
|
|
self.safety.init_tests()
|
|
|
|
# stock cruise controls are entirely bypassed under openpilot longitudinal control
|
|
def test_disable_control_allowed_from_cruise(self):
|
|
pass
|
|
|
|
def test_enable_control_allowed_from_cruise(self):
|
|
pass
|
|
|
|
def test_cruise_engaged_prev(self):
|
|
pass
|
|
|
|
def test_set_and_resume_buttons(self):
|
|
for button in ["set", "resume"]:
|
|
# ACC main switch must be on, engage on falling edge
|
|
self.safety.set_controls_allowed(0)
|
|
self._rx(self._ls_01_msg(_set=(button == "set"), resume=(button == "resume"), main_switch=0, bus=0))
|
|
self.assertFalse(self.safety.get_controls_allowed(), f"controls allowed on {button} with main switch off")
|
|
self._rx(self._ls_01_msg(main_switch=0, bus=0))
|
|
self._rx(self._ls_01_msg(_set=(button == "set"), resume=(button == "resume"), bus=0))
|
|
self.assertFalse(self.safety.get_controls_allowed(), f"controls allowed on {button} rising edge")
|
|
self._rx(self._ls_01_msg(bus=0))
|
|
self.assertTrue(self.safety.get_controls_allowed(), f"controls not allowed on {button} falling edge")
|
|
|
|
def test_main_switch(self):
|
|
# Disable as soon as the ACC main switch turns off
|
|
self._rx(self._ls_01_msg(bus=0))
|
|
self.safety.set_controls_allowed(1)
|
|
self._rx(self._ls_01_msg(main_switch=0, bus=0))
|
|
self.assertFalse(self.safety.get_controls_allowed(), "controls allowed after ACC main switch off")
|
|
|
|
def test_accel_safety_check(self):
|
|
for controls_allowed in [True, False]:
|
|
for accel in np.concatenate((np.arange(MIN_ACCEL - 2, MAX_ACCEL + 2, 0.03), [0, self.INACTIVE_ACCEL])):
|
|
accel = round(accel, 2)
|
|
is_inactive_accel = accel == self.INACTIVE_ACCEL
|
|
send = (controls_allowed and MIN_ACCEL <= accel <= MAX_ACCEL) or is_inactive_accel
|
|
self.safety.set_controls_allowed(controls_allowed)
|
|
self.assertEqual(send, self._tx(self._acc_01_msg(accel)), (controls_allowed, accel))
|
|
|
|
def test_accel_allowed_with_gas_pressed(self):
|
|
self._rx(self._user_gas_msg(1))
|
|
self.safety.set_controls_allowed(True)
|
|
self.assertTrue(self._tx(self._acc_01_msg(0.5)))
|
|
|
|
|
|
if __name__ == "__main__":
|
|
unittest.main()
|